Hydraulic Swaging Machine

Ningbo Instruments Mechanics Hydraulic Swaging Machine is widely used in cable or steel wire rope to make ferrules for rigging. We have models from 350 ton to 2500 ton, or even bigger swaging power. We have different size of dies to make different ferrules, steel and aluminum.

Hydraulic Wire rope press machine is made of four parts: body frame , hydraulic cylinder parts, electrical parts, base. Framework has 2 structures, no stress concentration points, with this frame structure without damaging the wire rope pressed record, safe and reliable

Retail price

0.0

Yuan

Market price

0.0

Yuan

Number of views:

1007

Product serial number

A041

Category

Hydraulic Swaging Machine

Quantity

Stock:



Parameter

Parameters

Features

Application

No.	Model Number	Max Press Capacity	Wire Diameter	Volt	Frequency	Piston press speed	Piston return speed	Size LWH	Machine Weight
No.	Model Number	Ton	mm	V	Hz	-	-	mm	KG
1	TI-HSM350	350	6-25	380	50	4.8 mm/sec	25.1mm/sec	15506001620	2200
2	TI-HSM500	500	6-32	380	50	3.6 mm/sec	22mm/sec	16806201720	3200
3	TI-HSM800	800	6-42	380	50	3.6 mm/sec	22mm/sec	18208501970	4800
4	TI-HSM1250	1250	6-56	380	50	4.8 mm/sec	18mm/sec	218011402350	8000
5	TI-HSM2500	2500	6-85	380	50	10 mm/sec	10 mm/sec	248011502710	16000

Scan the QR code to read on your phone

● Uniform automation systems from the control of the hydraulic units through to the electrical drive technology for the transfer;

● High process quality thanks to the closed-loop control for position and pressure;

● Quiet operation; Exact pressing forces in the individual axes;

● Increase in energy efficiency through the use of hydraulic pumps;

● User friendly PLC electric control system and advanced model is equiped with LCD screen;

● Press body is made of solid, one-piece alloy steel casting;

● No linkage or excessive moving parts that can wear or crack;

● Under or over-swaging is eliminated by a dial selection that sets pressure according to size of sleeve;

● Three operational settings—Automatic, Automatic Return and Manual. Automatic mode allows for machine to operate at pre-fixed settings. Automatic return allows swaging when foot pedal is depressed and will retract automatically when foot pedal is released;

● Distance between die openings can be set manually；

● Controls equipped with an emergency shut-off switch;

● Machine can be operated by foot pedal switch or by hand on the control panel;

● Die holders can be made to accept other manufacturer’s dies.

SPEED & EFFICIENCY:

● No need to change dies for sleeves over 1” - up to 2-1/2”;

● Swage Flemish eye sleeves in just two presses；

● Reduces cycles on swaging press to increase machine life.